Diagnose No Start/Hard Start, customer installed a new battery in 2 weeks ago but did not tighten the hold down. customer wishes to use 150 amp alternator, a new belt, and a new tensioner
SERPENTINE BELT TENSIONER – Remove & Replace – V6,Gas – [DOES NOT include Air Conditioning System recover, evacuate and recharge.] – [Includes: Replace Belt (if necessary).]
Fred S. gave our service a 5 star review on 7/24/2025
Change Oil and Filter, Lube Chassis as Required, Check and Top Off Fluids, Check Air Filter, Set Tire Pressures, and Visual Safety Inspection.
Serpentine belt and all hoses coolant and vaccum were all good spring clamps were tight as could be no wiggle or play in the clamps. No hoses seemed worn, dry rotted, or damaged in any way. Belt was in good condition not dry or cracking.
Mounting points from transmission to drive shaft and from drive shaft to differential were all torqued to spec 65ft lbs no play or extra movement out of the bolts and carrier bearing was tight at 27 ft lbs Front driveshaft was the same tight at 65 ft lbs no extra wiggle
Ron S. gave our service a 5 star review on 7/1/2025